|
X-Charger B6 Charger & Discharger
Battery Type: Li-Ion, Li-Po, NiCd, NiMH, Lead Acid
Individual cell balancing and Built-in LiPo balancer
Microprocessor controlled and Delta-peak sensitivity
Two Versions: with or without DC power supply
 |
|
|
Dynamite Passport 6S LiPo Charger
# DYN4065
Charges 2–6S Li-Po and Li-Fe batteries
1- to 4-amp selectable charge rates
Reverse and short circuit protection
Integrated balance ports and various adapters included
|
 |
Dynamite Prophet Sport AC/DC Peak Charger
# DYN4056
|
|
|
AstroFlight 109 Lithium Charger
Charges 1-9 cell Lithium Polymer battery packs
Charge current adjustable from 50mA to 9000mA
Charge Time cut off: 10 hours
Discharge cut off: 3.2 volts per cell
|
 |
Competition Electronics Turbo 35 GFX Charging System
Upgradeable for Li-Po battery
The most advance charge/discharge system on the market
Large backlit graphic display
Graph charge and discharge curves on screen
Shows the MAH during charge
Re-match your packs or see which pack will give the best performance
Shows cell and pack data include Discharge time, average voltage, cell resistance and more
|
|
|
Electrifly PolyCharge4 4-Output LiPo Charger
# GPMM3015
Four outputs independently charge 1-4 cell LiPo batteries
Reverse polarity and current overload protection on input
Automatically detects number of cells on each output-no switch to set
|
 |
GWS MC-2002 processor controlled charger
4 to 12 Cells and 50mAh to 3000mAh NiCd or NiMH
Charging Current: 0.25 ~ 6.00A Continuous
Output Reverse Polarity and Short Protection
Sturdy Aluminum Case with Heavy Duty Heat Sink
Microprocessor Controlled Automatic Delta-Peak Cut-off
|
 |
APS Racing 3-in-1 Dyno-Charger
Charges 1-8 cells
Stores maximum RPM and amp draw for comparison
Run motors from 0.1 to 8 volts at up to 20A
Programmable delta-peak from 10 to 200 mV per pack
Selectable charge current from 0.5 to 8 amps
|
 |
TeamLOSI Mini Peak Charger
|
 |
Blue Bird BAC-001 Ni-CD Ni-MH Peak charger
|
|
|
Orion Advantage Charging System with LiPo function
|
 |
HobbyZone DC Peak Charger (1.8A)
No. HBZ6519
|
 |
ST Model 3Cell 11.1V LiPo Charger
|
 |
Park Pal Peak Detection Quick Charger
Specially for Park Flyer batteries
Also good for small NiCd or NiMH batteries
Charging rate: 0.15 to 1 amp
|
 |
CSM Li-Po Voltage Guard w/ LED
# CMLJG011
Microprocessor Controlled and Auto-Calibrating
Threshold: 2 cells(2.5V / cell); 10 cells(3.4V / cell)
|
 |
Astro "Blinky" Battery Balancer
# 106
For 2 to 6 cell Lithium Polymer batteries
Balances battery pack while charging
|
 |
FMA Direct Automatic Cell Detect Low Voltage Cutoff Device
# AVC1AIR
Provide proper cutoff voltage for Lithium Polymer, NiCd and NiMH battery packs
|
 |
DualSky PCM3S 11.1V 3-Cell Balancer
Prevents overcharge and balances each Li-Po cell
|
 |
Novak 2-Cell Smart-Stop LiPo Cut-Off
# 5470
Monitor Li-Po battery pack voltage and prevent the batteries from going below the critical safety voltage level
|
|
Novak 3-Cell Smart-Stop LiPo Cut-Off
# 5472
Monitor Li-Po battery pack voltage and prevent the batteries from going below the critical safety voltage level
|
|
