The most advance microprocessor-based charging/discharging system on the market. Features: Large backlit display, supports charging/discharging of 1-8 cells, Real-time charge and discharge graphs, supports charge rates of up to 12.0 amps, supports discharge rates of .5 to 35 amps for 1-6 cells and .5 to 25 amps for 7 cells and .5 to 20 amps for 8 cells, cycle mode allows automatic charge, peak and discharge and records (and graphs) all data including relative internal resistance and Li-Po upgradeable.

This is competition grade charger for all NiCd or NiMH cells. Now with multiple rate charge mode to customize your charge profile and get maximum performance from your packs. Peak detection linear charging from .15 to 7 amps and 4 to 7 cell packs. Settable peak detect range .012 volts to .192 volts. Backlit 32 character displays a built-in volt meter ammeter and mAh.

DX-102 LEVEL is developed with multi-functions. Computerized control for NiCD or NiMH discharging. Discharge rate can be set at either 1A or 5A. Discharging cut off voltage can be set every 0.05V in the range 0.80-1.15V per cell. Can be used for between 1 - 10 cells (200mAh) or higher.